Jump to: navigation, search

Difference between revisions of "Basic commands to other devices"

 
Line 1: Line 1:
With regards to players or recorders,  
+
With regards to players or recorders, it is quite easy to drive players and recorders through the "User control pressed" command (<code>0x44</code>), that simulates remote control codes.
It is quite easy to drive players and recorders through the "User control pressed" command (<code>0x44</code>), that simulates remote control codes.
+
  
 
You can use something like (z being the logical address of the target device on the bus):
 
You can use something like (z being the logical address of the target device on the bus):

Latest revision as of 06:11, 27 August 2011

With regards to players or recorders, it is quite easy to drive players and recorders through the "User control pressed" command (0x44), that simulates remote control codes.

You can use something like (z being the logical address of the target device on the bus):

  • play: 0z:44:44
  • menu: 0z:44:0B
  • up, down, select: 0z:44:01, 0z:44:02, 0z:44:00

A lot of other commands are possible based on this model 0z:44:ab.

The whole list of available ab codes is available in the HDMI spec, as well as on CEC-O-MATIC.

Other hints to discover CEC